Drawers misaligned

If the drawers are touching or misaligned, try this trick to realign the drawers.

1. Extend the drawer to expose the front and middle screw on the rail attached to the drawer side

2. The middle screw should be installed into this hole on the drawer side rail, if your middle screw is not, remove it and screw it into this hole. 

3. Remove the front screw and loosen the middle screw. This will allow the drawer to move up and down to be repositioned. Once you've realigned the drawer, replace the front screw and tighten to secure. You may use any of the holes to put the front screw in, just make sure you tighten where the drawer is aligned.

SEE VIDEO ATTACHED TO THIS ARTICLE