My lift platform is hitting the top of my cabinet

If you discover that your platform panel is catching on the table top or isn't centered inside the opening-you can reposition the lift panel to have clearance on all sides. 

    

Step 1:

Remove the lift panel-it is held onto the hydraulic lift using 4 screws

Step 2:

Bring the lifter to the top position by pressing firmly on the lifter

Step 3:

Place the lift platform onto the lifter and center the panel so that there is clearance on all sides. If necessary you can use a spacer (i.e cardboard) to put around the platform.

Step 4: 

Screw the lift panel down by replacing the 4 screws. You can use the other hole that is on the lift bracket if needed to secure the platform to the lifter. Activate lifter by pressing firmly on the sewing platform to ensure the lift panel no longer catches.